-
Description
The CS-NRI EPN-101 is a solvent free, chemically resistant, two-part bulk epoxy paste filler used to fill and transition surface irregularities including pits, voids, corrosion defects, dents, leak repair “stopgaps”, etc. Its high-build capability allows technicians to transition aggressive changes in geometry without multiple lifts. Once cured, EPN-101 is machinable.
Benefits
- High-build capability without slumping or sagging
- Can be over-coated as soon as it is dry to the touch
- Resistant to a wide variety of inorganic acids, alkalis, salts and organic media
- Machinable once cured
Applications
- Any metal surface defect containing pits, voids, corrosion, etc.
- Used in conjunction with patches, plugs and other leak repair techniques
- Used to transition aggressive changes in geometry or large defects prior to installing ECR Systems
Storage
Store indoors in cool, dry, ventilated storage at temperatures below 35°C (95°F ) in original, unopened containers. Minimum storage temperature 15.5°C (60°F)
Limitations
- Epoxy application temperature: minimum of 5°C (40°F) or less than 3°C (37°F) above dew point
- Base component should be warmed to 15.5°C to 25°C (60 to 77°F) before mixing
- Over-coating time should not exceed 3 hours
- Suitable for long-term immersion at temperatures up to 70°C (158°F) and intermittent contactwith pressurized steam up to 120°C (248°F)
- Resistant to dry heat in excess of 200°C (392°F) dependent on load
Material Properties
TEST RESULT
Hardness, Rockwell R 100
Hardness, Shore D 90
Compressive Strength @ 75°F (24°C) 19,400 psi (133.8 MPa)
Compression Modulus @ 75°F (24°C) 511 ksi (3,524 MPa)
Tensile Shear Adhesion 2,630 psi (18.2 MPa)
Flexural Strength 10,000 psi (68.9 MPa)
Corrosion Resistance 5,000 hours
Glass Transition Temperature (Tg) 240°F (116°C) With 248°F (160°C) Cure
Heat Distortion Temperature 136°F (58°C) With 68°F (20°C) Cure
Heat Distortion Temperature 208°F (98°C) With 212°F (100°C) Cure
You May Also Like
